Tuesday, December 6, 2016

840 g3 windows on 256GB SSD

Please see below for step by step instructions for imaging the HP 840 G3 with I7 and dual hard drives

1.       Turn on the laptop and boot into Bios Setup by pressing ESC or F10
2.       Once in the Bios setup please select the Security tab
3.       Once Inside the security scroll down and choose TPM Embedded Security
4.       Please set TMP Devices to Available
5.       Please put a check in the TPM State box
6.       For Clear TPM and TPM Activation Policy you can leave these option at default selections
7.       Save the changes and move on to the Advance Tab
8.       Once inside the Advance Tab please select Secure Boot Configuration
9.       Please Change Configuration Legacy Support and Secure Boot to: Legacy Support Enable and Secure boot Disable from the drop down menu
10.   Save The Changes and go back to Advance Tab
11.   Once back at the Advance Tab please select Boot Options
12.   Inside the  Boot Options please scroll down to Legacy boot order
13.   Boot order should be set as 1, SanDisk or Samsung SSD 256GB as the first boot disk, followed by the conventional HDD as you secondary drive 500GB or 1TB
14.   After settings are made save your changes then boot in PXE and choose Developer ( HP 840 G3 ) – Win 10 X64 image as normal.