Change a Basic Disk into a Dynamic Disk

pplies To: Windows 7, Windows Server 2008 R2
When you change a basic disk to dynamic, you can create volumes that span multiple disks (spanned and striped volumes). Dynamic volumes can be used in most but not all situations.
Basic disks support only primary partitions, extended partitions, and logical drives. Basic disks have been supported in operating systems since MS-DOS, while dynamic disks have been supported in operating systems since Windows 2000.
Backup Operators or Administrator is the minimum membership required.

Caution
Do not convert disks to dynamic that contain multiple installations of Windows 2000, Windows XP Professional, or the Windows Server 2003 family of operating systems. It is likely that you will no longer be able to start the second installation. For more information, see http://go.microsoft.com/fwlink/?LinkId=64134.

Note
The decision to convert a basic disk to a dynamic disk has implications that should be considered carefully. For more information about basic and dynamic disks and how to choose which type to use, see http://go.microsoft.com/fwlink/?LinkId=64133.

Note
Before you convert disks, close any programs that are running on those disks.

Changing a basic disk into a dynamic disk

• Using the Windows interface
  
  
• Using a command line
  
  

To change a basic disk into a dynamic disk using the Windows interface

1. In Disk Management, right-click the basic disk you want to convert.
   
2. Click Convert to Dynamic Disk….
   
3. Follow the instructions on your screen.
   

   Note

   If you do not see this menu item, you might be right-clicking a volume instead of a disk, the disk might have been previously converted to a dynamic disk, or the computer is a portable computer. (Dynamic disks are not supported on portable computers, removable disks, detachable disks that use Universal Serial Bus (USB) or IEEE 1394 (also called FireWire) interfaces, or on disks connected to shared SCSI buses.) In addition, you cannot convert cluster disks connected to shared SCSI or Fibre Channel buses to dynamic disks. The Cluster service supports basic disks only.)

   
   

   Caution

   If you are using a basic disk as a storage area for shadow copies and you intend to convert the disk into a dynamic disk, it is important to take the following precaution to avoid data loss. If the disk is a non-boot volume and is a different volume from where the original files reside, you must first dismount and take offline the volume containing the original files before you convert the disk containing shadow copies to a dynamic disk. You must bring the volume containing the original files back online within 20 minutes, otherwise, you will lose the data stored in the existing shadow copies. If the shadow copies are located on a boot volume, you can convert the disk to dynamic without losing shadow copies. You can use the mountvol command with the /p option to dismount the volume and take it offline. You can mount the volume and bring it online using the mountvol command or the Disk Management snap-in.

   
   

Additional considerations

• For additional information about converting basic disks to dynamic disks, see http://go.microsoft.com/fwlink/?LinkId=64136.
  
• After you convert a basic disk to a dynamic disk, you cannot change the dynamic volumes back to partitions. Instead, you must delete all dynamic volumes on the disk and then use the Convert To Basic Disk command. If you want to keep your data, you must first back it up or move it to another volume.
  
• Once converted, a dynamic disk will not contain basic volumes (primary partitions or logical drives).
  
• When you convert a basic disk to a dynamic disk, any existing partitions or logical drives on the basic disk become simple volumes on the dynamic disk.
  
• For the conversion to succeed, any master boot record (MBR) disks to be converted must contain at least 1 MB of space for the dynamic disk database.
  

To change a basic disk into a dynamic disk using a command line

1. Open a command prompt and type diskpart.
   
2. At the DISKPART prompt, type list disk. Make note of the disk number you want to convert to dynamic.
   
3. At the DISKPART prompt, type select disk .
   
4. At the DISKPART prompt, type convert dynamic.
   

 

Value	Description
list disk	Displays a list of disks and information about them, such as their size, amount of available free space, whether the disk is a basic or dynamic disk, and whether the disk uses the master boot record (MBR) or GUID partition table (GPT) partition style. The disk marked with an asterisk (*) has focus.
select disk	Selects the specified disk, where disknumber is the disk number, and gives it focus.
convert dynamic	Converts a basic disk into a dynamic disk. Any existing partitions on the disk become simple volumes.

Caution

If you are using a basic disk as a storage area for shadow copies and you intend to convert the disk into a dynamic disk, it is important to take the following precaution to avoid data loss. If the disk is a non-boot volume and is a different volume from where the original files reside, you must first dismount and take offline the volume containing the original files before you convert the disk containing shadow copies to a dynamic disk. You must bring the volume containing the original files back online within 20 minutes, otherwise, you will lose the data stored in the existing shadow copies. If the shadow copies are located on a boot volume, you can convert the disk to dynamic without losing shadow copies. You can use the mountvol command with the /p option to dismount the volume and take it offline. You can mount the volume and bring it online using the mountvol command or the Disk Management snap-in.

Additional considerations

• For additional information about converting basic disks to dynamic disks, see http://go.microsoft.com/fwlink/?LinkId=64136.
  
• After you convert a basic disk to a dynamic disk, you cannot change the dynamic volumes back to partitions. Instead, you must delete all dynamic volumes on the disk and then use the Convert To Basic Disk command. If you want to keep your data, you must first back it up or move it to another volume.
  
• Once converted, a dynamic disk will not contain basic volumes (primary partitions or logical drives).
  
• When you convert a basic disk to a dynamic disk, any existing partitions or logical drives on the basic disk become simple volumes on the dynamic disk.
  
• For the conversion to succeed, any master boot record (MBR) disks to be converted must contain at least 1 MB of space for the dynamic disk database.

 http://technet.microsoft.com/en-us/library/cc731274.aspx