Friday, June 11, 2010

How to change default gateway on windows by command line.

To display the entire contents of the IP routing table, type:

route print

To display the routes in the IP routing table that begin with 10., type:

route print 10.*

To add a default route with the default gateway address of 192.168.12.1, type:

route add 0.0.0.0 mask 0.0.0.0 192.168.12.1

To add a route to the destination 10.41.0.0 with the subnet mask of 255.255.0.0 and the next hop address of 10.27.0.1, type:

route add 10.41.0.0 mask 255.255.0.0 10.27.0.1

To add a persistent route to the destination 10.41.0.0 with the subnet mask of 255.255.0.0 and the next hop address of 10.27.0.1, type:

route -p add 10.41.0.0 mask 255.255.0.0 10.27.0.1

To add a route to the destination 10.41.0.0 with the subnet mask of 255.255.0.0, the next hop address of 10.27.0.1, and the cost metric of 7, type:

route add 10.41.0.0 mask 255.255.0.0 10.27.0.1 metric 7

To add a route to the destination 10.41.0.0 with the subnet mask of 255.255.0.0, the next hop address of 10.27.0.1, and using the interface index 0×3, type:

route add 10.41.0.0 mask 255.255.0.0 10.27.0.1 if 0×3

To delete the route to the destination 10.41.0.0 with the subnet mask of 255.255.0.0, type:

route delete 10.41.0.0 mask 255.255.0.0

To delete all routes in the IP routing table that begin with 10., type:

route delete 10.*

To change the next hop address of the route with the destination of 10.41.0.0 and the subnet mask of 255.255.0.0 from 10.27.0.1 to 10.27.0.25, type:

route change 10.41.0.0 mask 255.255.0.0 10.27.0.25

1 comment:

  1. Thanks Surender Reddy for posting information on how to change default gateway on windows by command line. I just tried to do it and it worked well for me.
    digital certificates

    ReplyDelete